B14 – Advanced Marine Engineering Design

B14 · Marine Engineering and Propulsion

B14 – Advanced Marine Engineering Design

This online course from Oceans Technology Higher Education is designed for about 20 hours of study. Its main sections are Marine Design Framing; Thermodynamic Cycles; Turbocharging and Gas Turbines; Gas Engines and Emissions; Electric Propulsion, with worked examples and graded section quizzes. It suits engineering graduates and practising engineers who want a structured refresher or self-study CPD in maritime engineering, and anyone moving into this specialist area of marine and offshore work.

Duration 20 hours · Online · 10 sections, 36 lessons, a 164-page downloadable course book · Advanced level · Can be recorded as self-directed CPD (not a validated professional qualification)

View on our learning platform

Pay securely by debit or credit card, or PayPal. No PayPal account needed.

Course Content

10 sections · 36 lessons · 20h

1. Introduction 1 lesson
  • 1.1 Welcome
2. Marine Design Framing 4 lessons
  • 2.1 Marine Engineering Scope
  • 2.2 Mission to Systems
  • 2.3 Design Process Roles
  • 2.4 Quiz 1
3. Thermodynamic Cycles 5 lessons
  • 3.1 Energy and Thermodynamic Laws
  • 3.2 Air-Standard Cycles
  • 3.3 Cycle Calculations
  • 3.4 Air Properties and Flow
  • 3.5 Quiz 2
4. Turbocharging and Gas Turbines 5 lessons
  • 4.1 Why Turbocharge
  • 4.2 Turbocharger Cycle Analysis
  • 4.3 Gas Turbine Problems
  • 4.4 Operating Envelope
  • 4.5 Quiz 3
5. Gas Engines and Emissions 5 lessons
  • 5.1 Gas Engine Classes
  • 5.2 Pollutants and Formation
  • 5.3 Limits and Corrections
  • 5.4 Control Technologies
  • 5.5 Quiz 4
6. Electric Propulsion 3 lessons
  • 6.1 Propulsion Architectures
  • 6.2 Converters and Harmonics
  • 6.3 Quiz 5
7. Resistance and Propeller Design 4 lessons
  • 7.1 Resistance Estimation
  • 7.2 Propeller Selection
  • 7.3 Powering Problems
  • 7.4 Quiz 6
8. Torsional and Hull Vibration 4 lessons
  • 8.1 Excitation Sources
  • 8.2 Holzer and Campbell
  • 8.3 Hull Vibration Behaviour
  • 8.4 Quiz 7
9. Auxiliary Systems 4 lessons
  • 9.1 Mobility and Control Systems
  • 9.2 Utility Systems
  • 9.3 Protection and Monitoring
  • 9.4 Quiz 8
10. Summary 1 lesson
  • 10.1 Key Takeaways

A cadet reviews her logbook in the barque Eagle's engine room, 2011
Photo: U.S. Coast Guard, public domain, via Wikimedia Commons — source https://commons.wikimedia.org/wiki/File:Coast_Guard_Cutter_Eagle_110623-G-EM820-412.jpg

This online course from Oceans Technology Higher Education is designed for about 20 hours of study. Its main sections are Marine Design Framing; Thermodynamic Cycles; Turbocharging and Gas Turbines; Gas Engines and Emissions; Electric Propulsion, with worked examples and graded section quizzes. It suits engineering graduates and practising engineers who want a structured refresher or self-study CPD in maritime engineering, and anyone moving into this specialist area of marine and offshore work.

Advanced marine engineering design means connecting mission requirements to real onboard machinery and carrying the analysis through to defensible design judgements. This course follows that workflow. It starts by decomposing a ship's mission into functions, systems, subsystems and components, then builds the thermodynamic tools needed for propulsion design, including air-standard cycle analysis, air properties and compressible flow. It analyses turbocharging and gas-turbine behaviour, including efficiencies, pressure ratios and operating envelopes, and evaluates marine gas-engine types, pollutant formation, regulatory limits and control technologies under MARPOL Annex VI. The course then covers electric propulsion architectures and power-electronic converters, preliminary resistance estimation and propeller selection, vibration excitation and shaft-system analysis, and finally the mobility, utility, protection and monitoring systems that complete an integrated machinery design.

Course at a glance: Duration 20 hours · Online · 10 sections, 36 lessons, a 164-page downloadable course book

What you will learn

  • Translate ship mission requirements into functions, systems, subsystems and components.
  • Apply air-standard thermodynamic cycle analysis and compressible-flow relations to marine power-plant problems.
  • Analyse turbocharging and gas-turbine behaviour, including efficiencies, pressure ratios and operating envelopes.
  • Evaluate marine gas-engine classes, pollutant formation, emission limits and control technologies.
  • Describe electric propulsion architectures, power converters and harmonic effects.
  • Apply preliminary resistance estimation and propeller selection to powering problems.
  • Analyse vibration excitation, torsional vibration methods and hull vibration, and review auxiliary, protection and monitoring systems.

Dual air-standard cycle on a pressure-volume diagram for a marine diesel engine

Diagram by Oceans Technology

Inside the course: a high-level summary, section by section.

Systems framing

The course opens with the scope of marine engineering and the logic of mission decomposition. A ship's mission is broken down into functions, then systems, subsystems and components, in that order. Different missions change the design problem. Container transport emphasises cargo throughput, reliable schedules and efficient propulsion for regular port operations, so machinery, auxiliaries and maintenance planning must align with repetitive commercial service; naval service places greater weight on survivability, redundancy and flexibility. The roles of the different parties in the design process, and how responsibilities are divided, are also outlined.

Propulsion thermodynamics

The second section establishes the thermodynamic toolkit. Energy and the laws of thermodynamics are restated in the form used for marine machinery. Air-standard cycles, including the Otto, Diesel and dual or mixed cycles, are idealised tools for comparing how engines convert heat to work. The course shows how state data at each point of a cycle become the calculation itself, giving heat input, heat rejected, indicated work, peak pressure and thermal efficiency. Cycle calculation exercises build fluency, and the section closes with air properties and compressible flow, including nozzle flow and the condition in which a throat becomes choked when the back pressure falls below the critical pressure.

Turbocharging and gas turbines

Turbocharging is explained from first principles: compressing the intake air allows more fuel to be burned in the same cylinder, raising power density. Constant-pressure and pulse turbocharging are compared, with pulse systems making more energy available at the turbine inlet for good acceleration and low-load performance, at the cost of lower turbine efficiency. Turbocharger cycle analysis links compressor and turbine efficiencies, pressure ratios and the energy balance between them. Gas turbine problems apply the Brayton cycle to marine units, and the operating envelope shows how limits on speed, temperature and surge define where engines and turbochargers can operate safely.

Gas engines and emissions

The fourth section focuses on gas-fuelled engines and their emissions. Marine gas engines are classified by gas pressure level and by how the fuel enters the cylinder, whether by fumigation into the intake air or by direct injection, and by whether control is electronic or mechanical. Pollutant formation is explained for nitrogen oxides, sulphur oxides, carbon monoxide, hydrocarbons, particulates and unburned methane. Because marine engines usually run lean, carbon monoxide is rarely a serious problem, while nitrogen oxides depend strongly on combustion temperature.

Regulatory limits under MARPOL Annex VI and related regional measures, including tiered nitrogen oxide limits and fuel sulphur limits, are reviewed together with the corrections applied to measured emissions. Control technologies, from engine tuning and exhaust gas recirculation to selective catalytic reduction and exhaust gas cleaning systems, are compared as compliance strategies.

Electric propulsion

Electric propulsion architectures are traced from propulsion demand to onboard power system integration. The course explains how generators, switchboards, converters and motors are arranged and how the generation strategy is aligned with the ship's operating needs. Power-electronic converters, which control motor speed and torque, introduce harmonics into the electrical network, and the course explains their effects and mitigation.

Campbell diagram for a marine shaft system showing excitation orders and resonance crossings

Diagram by Oceans Technology
Inside the B14 Advanced Marine Engineering Design course book

Preview of the course book

Resistance and propeller selection

Preliminary powering methods estimate resistance at an early design stage and screen sensible propeller candidates before detailed blade design. Powering problems link resistance, propulsive efficiency and propeller selection to required engine power, showing how early design decisions cascade into propulsion power and propulsor matching.

Vibration

Vibration excitation sources, including engines, propellers and auxiliary machinery, are identified, and two classical analysis tools are introduced. The Holzer method calculates torsional natural frequencies of shaft systems step by step, while the Campbell diagram compares natural frequencies with excitation orders across the speed range to reveal potential resonances. Hull vibration behaviour completes the section, explaining how the hull girder and local structures respond to excitation and why avoiding resonance at the design stage is far cheaper than correcting it after delivery. Torsional analysis is particularly important for shaft lines driven by slow-speed engines, where strong low-order excitation can create damaging stresses if critical speeds fall within the normal operating range.

Auxiliary and support systems

The final technical section covers mobility and control systems such as steering and manoeuvring, utility systems that supply water, air and other services, and protection and monitoring systems that detect faults and safeguard the plant. These systems are where the earlier mission decomposition becomes concrete: each function identified at the start of the course must be delivered by reliable equipment, with redundancy and monitoring appropriate to the ship's role.

Why this matters in practice

Marine machinery design now has to satisfy tighter emission rules, new fuels, electrification and demanding efficiency targets all at once. Engineers who can trace a design decision from the mission through thermodynamics, emissions, powering and vibration are better placed to justify their choices, spot conflicts early and avoid expensive late changes. The workflow taught in this course mirrors the way real design teams move from concept to specification, and the analytical methods give engineers the confidence to challenge supplier claims and defend their own recommendations to clients, class societies and regulators.

Key takeaways

You leave able to move from mission requirements to machinery design decisions, applying cycle analysis, turbocharger and gas-turbine methods, emission control strategies, electric propulsion concepts, powering methods and vibration analysis within an integrated engineering workflow.

How you study

The course is delivered fully online, so you can fit roughly 20 hours of study around professional commitments. Lessons combine clear explanation with examples, diagrams and short interactive checks, and the main sections end with graded quizzes (8 in total) so you can confirm you can apply each method before moving on. A 164-page course book can be downloaded and printed for offline reading and later reference.

Course contents

  • Marine Design Framing: Marine Engineering Scope; Mission to Systems; Design Process Roles
  • Thermodynamic Cycles: Energy and Thermodynamic Laws; Air-Standard Cycles; Cycle Calculations; Air Properties and Flow
  • Turbocharging and Gas Turbines: Why Turbocharge; Turbocharger Cycle Analysis; Gas Turbine Problems; Operating Envelope
  • Gas Engines and Emissions: Gas Engine Classes; Pollutants and Formation; Limits and Corrections; Control Technologies
  • Electric Propulsion: Propulsion Architectures; Converters and Harmonics
  • Resistance and Propeller Design: Resistance Estimation; Propeller Selection; Powering Problems
  • Torsional and Hull Vibration: Excitation Sources; Holzer and Campbell; Hull Vibration Behaviour
  • Auxiliary Systems: Mobility and Control Systems; Utility Systems; Protection and Monitoring
  • Summary: Key Takeaways

Who this course is for

This course is for engineering graduates and practising marine and mechanical engineers working on machinery design, propulsion plant specification, emissions compliance or technical management of ships. It suits engineers stepping up to design responsibilities and those preparing for advanced marine engineering study. A background in thermodynamics and marine machinery is assumed.

Using B14 as self-study CPD

B14 gives about 20 notional hours of structured, self-directed learning. A course book, a learning log and a reflection page help you keep evidence.

  • South Africa (ECSA, PrEng / PrTechEng): this course is not ECSA-validated. As a guide only, ECSA counts 1 CPD credit for every 10 notional hours, and its Category 1b covers self-study of non-validated material where you can show evidence of the activity. You may be able to claim it under ECSA’s current CPD rules. You are responsible for checking the rules and keeping your records.
  • UK (Engineering Council, CEng / IEng / EngTech): the Engineering Council sets no minimum CPD hours. Registrants plan, record and reflect on their CPD, and their institution may add its own rules. You can log B14 as self-directed learning, with your own reflection on what you applied.
  • Other countries: the course is fully online, so you can study it from anywhere with an internet connection, including India, the Middle East, Australia, the USA and elsewhere. It is not currently recognised or accredited by professional bodies in those countries. You may be able to record it as self-directed learning in your own CPD log; check your professional body’s rules and keep your own evidence.
  • Recognition: B14 is not currently recognised, accredited or endorsed by ECSA, IMarEST, RINA or any other professional body. Recognition by RINA and others is being pursued, and we will update this page if that changes.

Frequently asked questions

How long does Advanced Marine Engineering Design take?
The course is designed for about 20 hours of study. It is fully online, so you can spread it over a few weeks or complete it more quickly.

What is covered?
The course is organised into 10 sections with 36 lessons, moving from foundations to applied methods, as summarised above.

Is there material to keep after the course?
Yes. A downloadable 164-page course book accompanies the lessons for offline reading and later reference.

How is progress checked?
Each main section closes with a graded quiz (8 in total). The quizzes test understanding of the concepts and methods explained in the lessons rather than memorisation, and you can review the relevant lessons before attempting them.

Which topics does B14 cover?
B14 – Advanced Marine Engineering Design covers: Marine Design Framing (Marine Engineering Scope; Mission to Systems; Design Process Roles). Thermodynamic Cycles (Energy and Thermodynamic Laws; Air-Standard Cycles; Cycle Calculations; Air Properties and Flow). Turbocharging and Gas Turbines (Why Turbocharge; Turbocharger Cycle Analysis; Gas Turbine Problems; Operating Envelope). Gas Engines and Emissions (Gas Engine Classes; Pollutants and Formation; Limits and Corrections; Control Technologies). Electric Propulsion (Propulsion Architectures; Converters and Harmonics). Resistance and Propeller Design (Resistance Estimation; Propeller Selection; Powering Problems). Torsional and Hull Vibration (Excitation Sources; Holzer and Campbell; Hull Vibration Behaviour). Auxiliary Systems (Mobility and Control Systems; Utility Systems; Protection and Monitoring).

What will I be able to do after B14?
By the end of B14 you should be able to: Translate ship mission requirements into functions, systems, subsystems and components. Apply air-standard thermodynamic cycle analysis and compressible-flow relations to marine power-plant problems. Analyse turbocharging and gas-turbine behaviour, including efficiencies, pressure ratios and operating envelopes. Evaluate marine gas-engine classes, pollutant formation, emission limits and control technologies.

Who is B14 for, and what background do I need?
This course is for engineering graduates and practising marine and mechanical engineers working on machinery design, propulsion plant specification, emissions compliance or technical management of ships. It suits engineers stepping up to design responsibilities and those preparing for advanced marine engineering study. A background in thermodynamics and marine machinery is assumed.

Is B14 accredited, and can it count towards my CPD?
No. B14 – Advanced Marine Engineering Design is not currently accredited, validated or endorsed by ECSA, RINA, IMarEST or any other professional body; recognition by RINA and others is being pursued. As a guide only, ECSA counts 1 CPD credit per 10 notional hours, so about 20 hours of study may count towards your own CPD record as self-study. Check with your professional body.

Can I log B14 for CEng or IEng CPD?
You can record it as self-directed learning in your institution’s CPD record, with your own reflection. It is not recognised or endorsed by IMarEST, RINA or any other institution.

Can I study B14 from outside the UK?
Yes. B14 is delivered fully online, so you can study it from South Africa, India, the Middle East or anywhere else with an internet connection. The course book can be downloaded for offline reading.

Duration: 20 hours

Related courses: B13 – Marine Engineering — Propulsion, Auxiliary Systems & Control Engineering; B02 – Marine Engineering 1; B07 – Propeller-Engine Matching & Ship Resistance; B03 – Electrical Networks and Machines for Marine Applications

Enrol

Study at your own pace and work through the full course material, worked examples and section quizzes. Enrol in B14 – Advanced Marine Engineering Design →