D14 · Offshore Engineering
D14 – Design of Fixed and Floating Offshore Systems
This online course from Oceans Technology Higher Education is designed for about 20 hours of study. Its main sections are Environmental Design Considerations; Wave Loading and Response; Wind and Current Forces; Second-Order Wave Drift; Panel Method for Diffraction, with worked examples and graded section quizzes. It suits engineering graduates and practising engineers who want a structured refresher or self-study CPD in offshore structures design, and anyone moving into this specialist area of marine and offshore work.
View on our learning platformPay securely by debit or credit card, or PayPal. No PayPal account needed.
Course Content
1. Introduction 1 lesson
- 1.1 Welcome
2. Environmental Design Considerations 5 lessons
- 2.1 Why Metocean Data Matters
- 2.2 Return Period and Risk
- 2.3 Wind and Wave Characterisation
- 2.4 Currents and Combined Extremes
- 2.5 Quiz 1
3. Wave Loading and Response 5 lessons
- 3.1 When Morison Applies
- 3.2 Wave Force Components
- 3.3 Equation of Motion
- 3.4 Worked Response Example
- 3.5 Quiz 2
4. Wind and Current Forces 5 lessons
- 4.1 General Wind Force Equation
- 4.2 API and ABS Methods
- 4.3 Solidity and Shielding
- 4.4 Worked Wind Examples
- 4.5 Quiz 3
5. Second-Order Wave Drift 5 lessons
- 5.1 Origins of Slow Drift
- 5.2 Drift-Force Spectra
- 5.3 Resonance and Damping
- 5.4 Design Implications
- 5.5 Quiz 4
6. Panel Method for Diffraction 5 lessons
- 6.1 Why Panel Methods Matter
- 6.2 Velocity Potential Formulation
- 6.3 Panels to Forces
- 6.4 Validation and Limits
- 6.5 Quiz 5
7. Offshore Foundations 4 lessons
- 7.1 Foundation Design Context
- 7.2 Bearing and Sliding Checks
- 7.3 Elastic Footing Stiffness
- 7.4 Quiz 6
8. Design Problem Sets 4 lessons
- 8.1 Solving Design Problems
- 8.2 Integrated Loading Problems
- 8.3 Design Problem Review
- 8.4 Quiz 7
9. Structural Analysis Topics 6 lessons
- 9.1 Limit States and Fatigue
- 9.2 FEM Basis
- 9.3 Thin-Walled Torsion
- 9.4 Composite Laminate Coupling
- 9.5 Newmark Beta Response
- 9.6 Quiz 8
10. Summary 1 lesson
- 10.1 Key Takeaways
This online course from Oceans Technology Higher Education is designed for about 20 hours of study. Its main sections are Environmental Design Considerations; Wave Loading and Response; Wind and Current Forces; Second-Order Wave Drift; Panel Method for Diffraction, with worked examples and graded section quizzes. It suits engineering graduates and practising engineers who want a structured refresher or self-study CPD in offshore structures design, and anyone moving into this specialist area of marine and offshore work.
Designing an offshore structure requires a chain of decisions from environmental data to loads, response and structural checks. This course covers the end-to-end design of fixed and floating offshore systems: metocean design inputs, hydrodynamic loading, floating-system response and core structural and foundation design methods. It progresses from return periods, risk and the characterisation of wind, waves and currents, through Morison-equation wave forces and rigid-body response, wind loads using recognised industry methods, slow-drift forces and resonance, and panel methods based on potential flow. It then covers shallow foundation checks and footing stiffness, integrated loading problems and structural design topics including limit states and fatigue, the finite element basis, thin-walled torsion, composite laminate coupling and time-domain response using the Newmark-beta method.
Course at a glance: Duration 20 hours · Online · Level: Intermediate · 10 sections, 41 lessons, a 181-page downloadable course book
What you will learn
- Estimate metocean design parameters and select appropriate return periods and extreme-value combinations.
- Apply the Morison approach to calculate wave-induced forces and rigid-body response for slender structures.
- Calculate wind loads using general force equations, industry methods, solidity and shielding.
- Explain the origins of slow-drift forces, drift-force spectra, resonance and damping, and their design implications.
- Describe panel methods based on velocity potential theory, and their validation and limits.
- Carry out foundation bearing and sliding checks and estimate elastic footing stiffness.
- Apply limit states, fatigue, FEM, thin-walled torsion, laminate coupling and Newmark-beta concepts in offshore design.
Inside the course: a high-level summary, section by section.
Metocean design inputs
The course begins with return periods and risk. A return period is the average interval between events exceeding a given level, but it is not a guarantee: a platform designed for thirty years has a substantial chance of experiencing a fifty-year environmental extreme during its life. Return periods must therefore be chosen through risk and uncertainty analysis, so that the design event is appropriate to the intended life, exposure and consequence of failure. Wind and wave characterisation covers mean wind profiles, gusts, sea states and wave parameters, while currents and combined extremes address current profiles and the joint occurrence of wind, waves and current.
Morison wave forces
The Morison equation applies to slender members whose diameter is small compared with the wavelength, so that the structure does not significantly disturb the incident wave. The force combines a drag component, proportional to velocity squared, and an inertia component, proportional to fluid acceleration. The course explains when the Morison approach applies, how each force component behaves, and how forces are integrated over depth using wave kinematics and current profiles. The equation of motion for a rigid body under wave loading is developed, and a worked response example shows how loads and motions are computed.
Wind loads
The general wind force equation relates force to air density, wind speed, projected area and shape coefficients. Industry methods from recognised offshore standards provide height profiles, gust factors and coefficients. Solidity and shielding account for the reduction in force when members are partially hidden behind others in trusses and topsides. Worked examples demonstrate the calculations.
Slow drift
Second-order wave effects produce mean and slowly varying drift forces on floating structures. The course explains the origins of slow drift, drift-force spectra derived from wave spectra, and the resonance of moored structures at low natural frequencies with little damping. Design implications include large mooring line tensions and offsets, which must be considered in mooring and riser design.
Panel methods
Panel methods are numerical tools for computing wave loads on large-volume bodies, where diffraction and radiation are important. The velocity potential formulation and boundary conditions are explained, the body surface is discretised into panels, and forces and moments are obtained from the pressure distribution. Validation against model tests and the limits of potential flow, particularly for viscous effects and extreme waves, are discussed.
Foundations
The foundation section sets the design context for shallow foundations, such as gravity-based structures and mudmats. Bearing capacity and sliding checks ensure that the soil can carry vertical and horizontal loads with adequate safety, and elastic footing stiffness provides spring values for structural and dynamic analysis.
Integrated loading problems
A dedicated section shows how to approach multi-step assignment problems, combining metocean inputs, hydrodynamic and wind loads, response and structural checks into integrated loading problems. A design problem review consolidates the methods and highlights common errors.
Structural design topics
Limit states, including ultimate, serviceability, fatigue and accidental limit states, define the structural design checks, and fatigue assessment considers cyclic wave loading over the structure's life. The finite element basis provides the theoretical background for structural analysis software. Thin-walled torsion explains the behaviour of closed and open sections, composite laminate coupling explains how layered composite materials can couple bending, stretching and twisting, and the Newmark-beta method provides a time-stepping approach for dynamic response.
Connecting environment, loads and structure
A consistent theme is that every stage of offshore design depends on the one before it. The choice of return period and environmental combination sets the wave, wind and current inputs; those inputs determine whether Morison loading, panel methods or both are needed; the resulting loads and motions drive mooring, foundation and structural checks; and fatigue assessment depends on the long-term distribution of the same environmental actions. A small inconsistency early in the chain, such as combining a wave height with an unrelated wave period, or applying an extreme current with an extreme wave when the site statistics do not justify it, can propagate into significant over- or under-design. The course therefore trains learners to document assumptions, check units and orders of magnitude and compare results against simple hand estimates, habits that are just as valuable when reviewing the output of specialist software.
Why this matters in practice
Offshore designs must be safe, economical and defensible. Engineers who can trace the chain from environmental data through loads and response to structural and foundation checks can carry out preliminary designs, check detailed analyses and spot inconsistent assumptions that can lead to under- or over-design. The course's emphasis on worked examples and integrated problems reflects the way offshore design work is actually done, where hydrodynamic, wind, structural and geotechnical inputs must be combined consistently.
Key takeaways
You leave able to define metocean design inputs, calculate wave and wind loads, evaluate slow drift and panel-method results, check foundations and apply structural design concepts including fatigue, FEM, torsion, laminates and time-domain response.
How you study
The course is delivered fully online, so you can fit roughly 20 hours of study around professional commitments. Lessons combine clear explanation with examples, diagrams and short interactive checks, and the main sections end with graded quizzes (8 in total) so you can confirm you can apply each method before moving on. A 181-page course book can be downloaded and printed for offline reading and later reference.
Course contents
- Environmental Design Considerations: Why Metocean Data Matters; Return Period and Risk; Wind and Wave Characterisation; Currents and Combined Extremes
- Wave Loading and Response: When Morison Applies; Wave Force Components; Equation of Motion; Worked Response Example
- Wind and Current Forces: General Wind Force Equation; API and ABS Methods; Solidity and Shielding; Worked Wind Examples
- Second-Order Wave Drift: Origins of Slow Drift; Drift-Force Spectra; Resonance and Damping; Design Implications
- Panel Method for Diffraction: Why Panel Methods Matter; Velocity Potential Formulation; Panels to Forces; Validation and Limits
- Offshore Foundations: Foundation Design Context; Bearing and Sliding Checks; Elastic Footing Stiffness
- Design Problem Sets: Approaching Assignment Problems; Integrated Loading Problems; Design Problem Review
- Structural Analysis Topics: Limit States and Fatigue; FEM Basis; Thin-Walled Torsion; Composite Laminate Coupling; Newmark Beta Response
- Summary: Key Takeaways
Who this course is for
This course is for engineering graduates and practising offshore, structural, naval and civil engineers working on fixed and floating offshore systems. It assumes an engineering degree or equivalent experience and basic solid mechanics, fluid mechanics and structural analysis; familiarity with offshore structures is helpful but not required.
Using D14 as self-study CPD
D14 gives about 20 notional hours of structured, self-directed learning. A course book, a learning log and a reflection page help you keep evidence.
- South Africa (ECSA, PrEng / PrTechEng): this course is not ECSA-validated. As a guide only, ECSA counts 1 CPD credit for every 10 notional hours, and its Category 1b covers self-study of non-validated material where you can show evidence of the activity. You may be able to claim it under ECSA’s current CPD rules. You are responsible for checking the rules and keeping your records.
- UK (Engineering Council, CEng / IEng / EngTech): the Engineering Council sets no minimum CPD hours. Registrants plan, record and reflect on their CPD, and their institution may add its own rules. You can log D14 as self-directed learning, with your own reflection on what you applied.
- Other countries: the course is fully online, so you can study it from anywhere with an internet connection, including India, the Middle East, Australia, the USA and elsewhere. It is not currently recognised or accredited by professional bodies in those countries. You may be able to record it as self-directed learning in your own CPD log; check your professional body’s rules and keep your own evidence.
- Recognition: D14 is not currently recognised, accredited or endorsed by ECSA, IMarEST, RINA or any other professional body. Recognition by RINA and others is being pursued, and we will update this page if that changes.
Frequently asked questions
How long does Design of Fixed and Floating Offshore Systems take?
The course is designed for about 20 hours of study. It is fully online, so you can spread it over a few weeks or complete it more quickly.
What is covered?
The course is organised into 10 sections with 41 lessons, moving from foundations to applied methods, as summarised above.
Is there material to keep after the course?
Yes. A downloadable 181-page course book accompanies the lessons for offline reading and later reference.
How is progress checked?
Each main section closes with a graded quiz (8 in total). The quizzes test understanding of the concepts and methods explained in the lessons rather than memorisation, and you can review the relevant lessons before attempting them.
Can I record this study for my own professional development?
Yes. The course notebook includes a self-assessment of the course objectives before and after study, a reflection page and a learning log, which you can use to keep your own record of professional development.
Which topics does D14 cover?
D14 – Design of Fixed and Floating Offshore Systems covers: Environmental Design Considerations (Why Metocean Data Matters; Return Period and Risk; Wind and Wave Characterisation; Currents and Combined Extremes). Wave Loading and Response (When Morison Applies; Wave Force Components; Equation of Motion; Worked Response Example). Wind and Current Forces (General Wind Force Equation; API and ABS Methods; Solidity and Shielding; Worked Wind Examples). Second-Order Wave Drift (Origins of Slow Drift; Drift-Force Spectra; Resonance and Damping; Design Implications). Panel Method for Diffraction (Why Panel Methods Matter; Velocity Potential Formulation; Panels to Forces; Validation and Limits). Offshore Foundations (Foundation Design Context; Bearing and Sliding Checks; Elastic Footing Stiffness). Design Problem Sets (Approaching Assignment Problems; Integrated Loading Problems; Design Problem Review). Structural Analysis Topics (Limit States and Fatigue; FEM Basis; Thin-Walled Torsion; Composite Laminate Coupling).
What will I be able to do after D14?
By the end of D14 you should be able to: Estimate metocean design parameters and select appropriate return periods and extreme-value combinations. Apply the Morison approach to calculate wave-induced forces and rigid-body response for slender structures. Calculate wind loads using general force equations, industry methods, solidity and shielding. Explain the origins of slow-drift forces, drift-force spectra, resonance and damping, and their design implications.
Who is D14 for, and what background do I need?
This course is for engineering graduates and practising offshore, structural, naval and civil engineers working on fixed and floating offshore systems. It assumes an engineering degree or equivalent experience and basic solid mechanics, fluid mechanics and structural analysis; familiarity with offshore structures is helpful but not required.
Is D14 accredited, and can it count towards my CPD?
No. D14 – Design of Fixed and Floating Offshore Systems is not currently accredited, validated or endorsed by ECSA, RINA, IMarEST or any other professional body; recognition by RINA and others is being pursued. As a guide only, ECSA counts 1 CPD credit per 10 notional hours, so about 20 hours of study may count towards your own CPD record as self-study. Check with your professional body.
Can I log D14 for CEng or IEng CPD?
You can record it as self-directed learning in your institution’s CPD record, with your own reflection. It is not recognised or endorsed by IMarEST, RINA or any other institution.
Can I study D14 from outside the UK?
Yes. D14 is delivered fully online, so you can study it from South Africa, India, the Middle East or anywhere else with an internet connection. The course book can be downloaded for offline reading.
Level: Intermediate
Duration: 20 hours
Related courses: D05 – Offshore Hydromechanics; D06 – Structural Dynamics; D08 – Floating Structures; D15 – Pipelines, Moorings, Umbilicals and Risers
Enrol
Study at your own pace and work through the full course material, worked examples and section quizzes. Enrol in D14 – Design of Fixed and Floating Offshore Systems →
Recent Comments